Hynautic R-13 & R-04 Engine Control Reservoir - Rebuild

Hynautic Hydraulic Engine Control Reservoir - R-13 & R-04 (REBUILD SERVICE ONLY)

Background:

• Over an extended period of time the seals, moving parts, and the fluid in the hydraulic engine controls begin to fail. If your engine control reservoir is in a rebuildable state, we have the capability to repair them at our facility

How Much Does it Cost?

• $500 for the R-04
• $650 for the R-13
• Painted items accrue additional labor cost for cleaning (approximately $140)
• This includes a basic rebuild, the seal kit, and return ground shipping. Faster options available at checkout.
• NOTE: It is very likely that more than one component will need to be rebuilt including the control heads, the throttle slave, and the reservoir. We will contact you for approval before proceeding

How Long Does it Take?

• 1-2 day turnaround for most rebuilds

How to Remove your Reservoir:

• Make sure to relieve the pressure on the hydraulic reservoir
• Disconnect lines to the reservoir carefully labeling each one
• Remove from the bulkhead
• Drain ALL oil from part, if we have to drain the oil for you, there is a $30 fee for us to recycle it
• Place the reservoir in a plastic bag so it does not leak in the shipping box (If you have a R-04 send the Charging Block as Well)

How to Ship your Reservoir:

1. Add this part to your cart
2. Checkout
3. Place your part in a bag to prevent leaking
4. Include a note with your return shipping information, phone #, email, order # and anything you'd like us to know about the parts
5. Ship the parts to us with your favorite carrier
6. 1-2 day turnaround and we will ship the parts back

2nd Option:

• Include a note in the box with return address, contact information, and part information, ship the part to us, no need to checkout online. Please note, we can track your rebuild better if you place the order online, you acknowledge this when not placing the order online. 

Send your parts to the following address:

Seatech Marine Products
Attn: Service Dept.
2805 Canon St
San Diego CA 92106

Downloads & Resources:

• Hynautic Engine Control Filling and Bleeding Instructions [PDF]

Terms of Purchase:

• If the part is not rebuildable, inspection fee is $40 + return shipping, $20 of that can be applied to a new part
• Drain ALL oil from cylinder, if we have to drain the oil for you, there is a $30 fee for us to recycle it
• Estimated rebuild time is ONLY AN ESTIMATE, and is based off of when we receive your part, how many rebuilds we have going on at the moment, and how much attention your part will need. In no way is the ESTIMATED rebuild time a guarantee. If you need the part rebuild immediately (1 full day of having it) tell us in the order comments and we will contact you for a rush fee ($100)

About our Rebuild Service:

Seatech Marine Products, located in San Diego, CA has over 30+ years in the marine service business. We are an authorized dealer for Dometic Seastar, and are well versed of the ins and outs of your part. Once you send your part into us for rebuild, a marine tech will look over your part and make sure it only needs to be rebuilt, if we encounter more issues we will contact you for approval of repair and for your payment information. Most of the rebuilds we do take 1-2 business days, and we will ship the part back to you. Although your part is expected to last years, we offer a 6 month limited warranty. Please do not send in your part if it is frozen from corrosion or has holes in it.