Sleipner Side-Power
Side-Power SE100/185T 12v - 24v Twin Prop DC Thruster (ON/OFF) For Boats 40-56ft
- SKU:
- SE100/185T-12V
- UPC:
- SE100185T
- Condition:
- New
Description
SidePower SE100 Boat Bow & Stern Thruster - 100Kg of Thrust On/Off Operation - SE100/185T-12V - 24V
The Sleipner SidePower SE100 thruster fits boats around 40-56ft in length, which makes it one of the most popular choices. Side-Power's SE series thrusters are single speed thrusters with an On/Off like operation; they can be fitted into the bow of your boat using a bow tunnel and/or the stern of the boat using a stern tunnel. The Side-Power SE series are the go to thruster for the world's leading boat builders - for the compact installation, powerful Sleipner motors, energy and cost efficiency. Sleipners thrusters are the top-selling tunnel thrusters in the world with over 300,000 installations.
To receive Special Pricing on this unit, please click on the Request Special Pricing form below, or call (619) 222-9613.
- Sleipners bow and stern thrusters can be fitted in a tunnel through your boats bow or at the stern through a stern tunnel.
- Sleipner designs and builds the electric motors, solenoid, patented IPC control system and mechanical parts.
- Sleipner thrusters can be installed at an angle off the vertical center and are tailored to fit any space available in your vessel.
Product Features:
- Intelligent Power Control
- Protects the thruster from potential problems arising from high current applications and user faults
- Delay between drive directions
- Reduces solenoid lock-in - will stop the thruster in case of a locked in solenoid
- Side-Power's Dual Q-Props
- Q-Props reduce noise by up to 70% and on average 5Kg more of thrust than average thruster props
- High strength composite material
- Dual props deliver more thrust
- Sealed and Lifetime Lubricated Gear Leg
- Lifelong mechanical seals
- Zero oil changes - ever
- Galvanic Separation
- Immersed gear leg will not have galvanic corrosion from any electrical "leaks" caused by the motor
- Low Noise
- Overheat Protection
- Low Maintenance
- Can be mounted bow or stern
Parts to consider:
- Complete SE100 Bow Thruster Kit
- Bow Tunnel or Stern Tunnel
- Control Panels and Remote Controls
- AutoMainswitch, Battery Disconnect, Fuse & Fuseholder
- 4-Wire Harnesses (when not using AutoMainswitch)
- 5-Wire Harnesses (for use with AutoMainswitch)
- View all tunnels, controls and accessories here
Specifications:
Thrust at 10.5VDC | 220 lbs (100 kg) |
Thrust at 24VDC | 256 lbs (116 kg) |
Typical Boat Size | 40-56' (12-17 m) |
Tunnel Diameter (I.D.) | 7.28" (185 mm) |
Propulsion System | Twin |
Power at 10.5V | 8.4 hp (6.3 kg) |
Voltage | 12VDC |
Minimum Battery Capacity | 1425 CCA SAE |
Recommended Fuse Size | 500 Amp (SMANL500) |
Manufacturer | Side-Power |
Min Depth to Top of Tunnel | 5.47" (139mm) |
Min Depth to Center of Tunnel | 10.90" (277mm) |
Downloads and Resources:
- Sleipner Thruster Catalog
- DC Electric Thruster Catalog
- Tips for Maintaining Your Thruster
- Imtra's Sleipner Video Library
Questions?
- Tech Support: View Our Tech Support Page
- Stock Inquiry: Stock Inquiry Page
- No Sales Tax on Purchases Outside of California
- FREE Ground Shipping to the contiguous 48 states
- Sleipner, formerly known as SidePower, is distributed by Imtra in North America