Description
Sales & System Planning — Seatech Marine Products
Cape Horn Extreme 330 Compact Marine Watermaker
CH-330S · manual analog controls · 12V or 24V DC
Make fresh water aboard with the Spectra Cape Horn Extreme 330 Compact (CH-330S). This complete marine reverse-osmosis watermaker is rated for 15 US gallons (56 liters) per hour. It uses manual controls and separate pressure and flow instruments.
Why choose this model?
- Choose one or two feed pumps. The two diaphragm pumps work in parallel. Run one for lower output and power use, or both for higher output.
- Plan your running time. At the rated output, three hours makes about 45 US gallons before startup and freshwater-flush allowances.
- Keep operation hands-on. Check pressure, flow, and water quality yourself, then flush the system manually.
Actual output depends on seawater conditions and installation. Check module dimensions and leave room for servicing.
What's included
- Clark Pump and membrane module with 2 × 20-inch reverse-osmosis membranes and mounting arrangement.
- Two feed-pump modules with Shurflo diaphragm pumps, cooling provisions, and freshwater-flush equipment.
- Prefilter housing with 5-micron element.
- Accumulator assembly and pressure indication.
- Analog pressure/flow instrument assembly, manual operating controls, and charcoal-filter freshwater-flush arrangement.
- Handheld water-quality tester and product sample valve.
- Installation fittings kit, supplied product-water tubing, service kit, and operating manual.
- Two 25-foot lengths of 5/8-inch hose.
Confirm the final packing list with your quote. Boat-side installation parts are separate.
What you'll need for installation
- Seawater intake through-hull with a suitable scoop/strainer and seacock, plus a brine-discharge fitting.
- Power cable and circuit protection sized for the chosen voltage and cable run.
- Connections to a properly vented freshwater tank and a pressurized freshwater source for flushing.
- Accessible mounting space and any extra hose, tubing, fittings, or mounting hardware your boat needs.
Options and spares
- ZION-MAN membrane-preservation system — match the kit to your controller, voltage, and flush setup. Follow its instructions for extended flush intervals and storage.
- Replacement 5-micron prefilters, and the charcoal freshwater-flush filter.
- SC-1 storage compound — use when the manual’s storage procedure calls for it. For freezing weather, follow the separate winterizing instructions.
Buying questions
Does compact mean one enclosed unit?
The Cape Horn Extreme 330 Compact still uses separate modules. Check their dimensions and leave space to replace membranes and service the equipment.
Which voltage should I order?
Order the factory version that matches your 12V or 24V DC supply. The voltage options are separate factory configurations. Include your voltage and cable run in the quote request.
Size the battery bank, charging system, wiring, and protection for the load. Solar or wind charging must cover the boat’s total energy use.
Does it flush automatically?
The Cape Horn Extreme 330 Compact requires manual freshwater flushing. Compare Spectra Connect systems if you want automatic production and flushing.
Compare models
- CH-330 — Cape Horn Extreme 330
- CH-330R — Cape Horn Extreme 330R Remote Manual
- CH-330R-S — Cape Horn Extreme 330R Compact Remote Manual
Operation and care
Use the pressure and flow instruments and handheld water-quality tester as directed in the manual. Flush manually after use, and follow the storage procedure when the boat will be idle.
- Check for leaks and hose chafe, and clean the seawater strainer.
- Replace prefilters as needed. Maintain the carbon filter that protects the membrane during freshwater flushing.
- Follow the manual when chemical cleaning is needed. Low voltage, restricted feed water, and poor storage also need to be addressed.
Specifications
| System | Cape Horn Extreme 330 Compact — CH-330S |
|---|---|
| Rated production | 15 US GPH (56 L/h); 330 US gallons (1,249 L) per day |
| Voltage configuration | 12V or 24V DC |
| Published current requirement | 12V DC 19A or 24V DC 10A |
| Membranes | 2 × 20-inch |
| Feed-pump arrangement | two Shurflo diaphragm feed pumps |
| Prefilters | 5 micron |
| Controls | manual analog controls |
| System weight | 88 lb (40 kg) |
| Feed-water temperature reference | 36°F to 110°F |
| Rating conditions | 33,000 ppm seawater at 77°F (25°C) |
Daily capacity is a rounded rating for continuous operation. Plan around your actual running hours and allow for flushing. Use the installation manual to size wiring and circuit protection.
Manuals and downloads
3/7/2025 version. Match the control package, voltage, and membrane layout.
July 16, 2025. Specifications and dimensions.
Check module placement and hose routing.
Select the circuit matching the supplied voltage.
Get help from Seatech
Spectra Watermakers is the manufacturer. Seatech Marine Products is an authorized dealer. Send your daily water use, preferred running hours, boat voltage, and mounting photos or measurements. We can help choose the system and installation parts.
Ordering and warranty
- Standard manufacturer warranty: One year, subject to the manufacturer’s full terms.
- Extended-coverage program: Spectra describes two-year system coverage and lifetime Clark Pump coverage through its authorized full-service-provider program. Authorized installation and commissioning, owner registration, commissioning-report submission, and factory approval are required. See the applicable manual for eligibility and exclusions.
- No sales tax on purchases outside of California
- Built to Order - Average 30 day lead time
Confirm current availability and lead time before ordering. Because Spectra has MAP pricing on its systems, use the quote form for direct pricing.
International customers: Seatech ships worldwide. Contact us for a shipping quote if the website estimate needs review.