Check stock before ordering → Stock Inquiry

Hynautic HP6006 Boot Cover (170001) Cylinder Shaft Cover for K-22, K-27, K-31, K-33

(No reviews yet) Write a Review
SKU:
HP6006
Condition:
New
$94.00
In Stock - Ships within 24Hrs (M-Thu)

Description

Hynautic HP6006 Boot Cover (170001) - Cylinder Shaft Cover for K-22, K-27, K-31, K-33

The Hynautic HP6006 boot cover (also referenced as Hynautic 170001) is a protective rubber boot designed to cover the exposed cylinder shaft area on select Hynautic steering cylinders. It helps reduce contamination around the rod and wiper area by keeping spray, grit, and debris off the shaft during normal operation.

Features

  • Protective rubber boot for Hynautic cylinder shafts
  • Helps keep dirt, salt spray, and debris off the exposed rod area
  • Recommended replacement if the boot is cracked, torn, hardened, or missing
  • Supports cleaner operation around the rod and seal area

Specifications

Specification Value
Part Number HP6006
Cross Reference Hynautic 170001
Type Rubber boot cover for cylinder shaft
Sold As Single boot (order quantity based on your cylinder configuration)

Compatibility

Compatible Cylinder Notes
K-22 Boot cover commonly used on the K-22 shaft
K-27 Boot cover commonly used on the K-27 shaft
K-31 Compatible boot cover for K-31 shaft applications
K-33 Compatible boot cover for K-33 shaft applications

Note: Some cylinder models and configurations may not use a boot cover. If you are unsure, send Tech Support a photo of your cylinder rod end and shaft area.

Related Products

Installation Tips

  • Secure the rudder or tiller arm so it cannot swing while you work.
  • Remove the damaged boot and clean the shaft area so no grit is trapped under the new boot.
  • Slide the new boot into position and confirm it does not rub or pinch through full steering travel.
  • After installation, cycle steering lock-to-lock and verify the boot stays seated and does not bind.

Maintenance Guidelines

  • Inspect the boot each season for cracking, tearing, hardening, or loss of elasticity.
  • Rinse the cylinder shaft area with fresh water after heavy salt exposure.
  • Replace the boot if it no longer seals or stays in position during steering operation.

FAQs

Do I need a boot cover on my cylinder?
If your cylinder model uses a boot, it helps protect the shaft area from spray and debris. If your system was originally equipped with a boot, replacing a damaged or missing boot is recommended.

How do I confirm fitment?
Check your cylinder model (K-22, K-27, K-31, K-33) and compare the shaft area to the boot style. If you are unsure, send Tech Support a photo of the cylinder shaft area.

Downloads and Resources

Questions?

Important Notes

  • No sales tax on purchases outside of California
  • Buy now, pay later options available (Affirm or PayPal Pay Later)
  • International, USVI, Puerto Rican, Hawaiian and Alaskan customers - if shipping looks high at checkout, email us for a quote: info@seatechmarineproducts.com

Seatech Marine Products, Inc. is an authorized dealer, service center and installer for Hynautic.

View AllClose

Related Products