Skip to main content
Same-Day Shipping Order by 5 PM Eastern Time Items marked “Ships Same Day” qualify
100% USA-Based Business Serving boaters nationwide and internationally since 2001
Authorized Dealer Full manufacturer warranty

NHK MEC KE753A Second-Station Kit — Twin-Engine — Chrome, Stainless-Steel Levers

(No reviews yet) Write a Review
SKU:
KE753A
$1,187.33
Typically Ships in 1-2 Business Days - Use Stock Inquiry Page for Availability

Description

NHK MEC manufacturer logo

KE Controls by NHK MEC

U.S. Sales & Support — Seatech Marine Products

KE753A Second-Station Kit — Twin-Engine — Chrome, Stainless-Steel Levers

KE7+ · electronic shift and mechanical throttle

The NHK MEC KE753A adds a second helm station to a compatible twin-engine KE7+ engine-control installation. It supplies the station components listed below; the base system provides the control units and actuators.

  • Product type: second-station kit
  • Engine configuration: two engines; electronic shift and mechanical throttle
  • Lever style: stainless-steel; chrome control head
  • Order separately: A bus harness selected for the added station route

Not sure which KE system fits your boat? Get help from our team.

Request a System Quote

Schedule a 15-Minute Consultation

Why add a second helm?

  • Get a better view while maneuvering. Add an operating position where you can see the dock, stern or working area.
  • Use another helm without duplicating the engine hardware. The added control head communicates with the compatible base system.
  • Plan the station connection. Match the station-specific T-harness and bus-harness route to the system wiring diagram.

Included in the KE753A station kit

  • 1 × NM1053-00 — Twin-Engine KE+ Control Head - Chrome - Stainless-Steel Levers
  • 1 × NM0647-10 — KE+ T-Harness (R/C)
  • 1 × control-head buzzer: NJ0251-00 for 12 V or NJ0515-00 for 24 V

Required separately and installation planning

  • NM0649 bus harness — select the section length for the added station. Confirm each route length against the applicable wiring diagram. Bus, power and engine-interface harnesses have different roles.
  • KE753 — a compatible KE7+ base installation must already be present or supplied separately. The station kit does not include another control unit or actuator.
  • Configure the system using the control-unit settings described in the applicable legacy manual. Do not apply KE-XG programming instructions to a different generation.
  • The applicable manual limits the total CANbus-harness run to 80m. Plan the complete layout rather than treating this as the allowance for each section.

Request complete system pricing to include the required harnesses, cables and other installation parts.

Station expansion and setup options

KE7+ supports up to four helm control heads plus one optional wired handheld station with the appropriate components.

  • NM0906-00 — optional wired twin-engine handheld remote; match the socket harness and system generation.

Dimensions and reference images

NHK MEC KE753A control-head dimensional drawing

Downloads and Resources

FEATURED DOWNLOAD

NHK MEC Electronic Engine Controls Brochure

An overview of NHK MEC electronic engine controls, system choices and available options.

Download Brochure PDF
PDF

KE6+ / KE7+ Installation and Operation Manual

Use the manual for the exact system or component being installed.

Download PDF »
PDF

KE Series Brochure

Product literature and system information.

Download PDF »

KE753A product questions

Is KE753A a complete standalone control system?

No. KE753A adds the second helm to a compatible twin-engine KE7+ base installation. The base control unit and actuator hardware are supplied separately.

Which base installation does KE753A need?

Use the compatible KE7+ twin-engine base installation identified for KE753. Match the station number and wiring layout before ordering.

Is the bus harness included with KE753A?

No. Select the bus-harness length and layout for the added operating position separately.

Base-system reference specifications

These figures describe the connected base system. The control unit and actuator are not included in this additional-station kit.

  • Supply voltage: 9-32 V DC
  • Actuator current: 16 A peak; 5 A average/typical at 49 N load under the manual’s nominal conditions
  • Actuator current at stop/standby: 0.5 A or less
  • Maximum operating thrust: 147 N
  • Constraint load: 343 N
  • Maximum throttle travel: 80 mm
  • Electronic shift contact capacity: 5 A maximum, normally open, under nominal conditions

Why choose Seatech for KE Controls?

Get help matching the system to your engine and gearbox, planning the harnesses and cables, and finding replacement parts.

Request a system quote or contact Seatech Marine Products for parts selection and shipping information.

Related parts and support

Store information

  • No Sales Tax on Purchases outside of California
  • Free Fedex ground shipping to U.S. 48 Contiguous States
  • Discounted shipping rates for all other options

Additional Information

Return Policy for NHK MEC Parts & Systems:
All sales of NHK MEC components are final, with no returns, refunds, or exchanges accepted. Each component is rigorously inspected for quality before shipping. It is the customer's responsibility to verify compatibility prior to purchase.

Videos Hide Videos Show Videos

Related Products