Description
Sales & System Planning — Seatech Marine Products
Newport 1000R Remote Manual Marine Watermaker
NP-1000R · Remote Manual controls · 24V DC or 120V/240V AC configurations
Availability: No Longer Available. The Spectra Newport 1000R Remote Manual is a 41 GPH Remote Manual watermaker. Use this page to help identify an installed system or plan a refit.
The specifications below are historical catalog references. Check the installed equipment and serial number before ordering parts. Newer Connect models can have different controls, electrical equipment, and membranes.
Need parts or a current system?
Send Seatech the serial number and photos of the voltage nameplate, control panel, pump, and membrane assembly. We can help identify parts or discuss a current system.
Original system contents
- Seawater strainer, boost-pump module with service valve, and dual 20-micron/5-micron prefilters.
- Magdrive feed-water pump, accumulator, and switches for manual operation.
- Composite Clark Pump, 2 × 40-inch reverse-osmosis membranes, and pressure-vessel assemblies.
- Built-in three-way service valve and quick-disconnect.
- 25 feet of low-pressure product tubing, 24 feet of suction hose, and 24 feet of reinforced seawater hose.
- Tube fittings, hose clamps, one SC-1 storage chemical, installation manual, and warranty registration information.
Before choosing replacement equipment
- Seawater intake through-hull with a suitable scoop/strainer and seacock, plus a brine-discharge fitting.
- Identify the motor, power supply, and voltage from the installed equipment’s nameplates. Another Newport model may use different equipment.
- Connections to a properly vented freshwater tank and a pressurized freshwater source for flushing.
- Accessible mounting space and any extra hose, tubing, fittings, or mounting hardware your boat needs.
Service parts and options
- The original catalog lists Z±ION compatibility. Have Seatech match the kit and interface to your installed controller and flush setup before ordering.
- Replacement 20-micron prefilters, 5-micron prefilters, and the charcoal freshwater-flush filter.
- SC-1 storage compound — use when the manual’s storage procedure calls for it. For freezing weather, follow the separate winterizing instructions.
Parts and replacement questions
Can I order this system new?
This Remote Manual system is listed as No Longer Available. Contact Seatech about current systems.
Which manual should I use for parts?
Use the manual that matches the installed model, controller, voltage, and serial number. A newer Connect manual can describe different equipment. Seatech can help identify the correct documents and parts.
Is a Connect system a direct replacement?
A current Connect system is a refit option. Check power, membrane-module dimensions, controls, intake and discharge fittings, tank plumbing, mounting, and service access before reusing existing connections.
Compare models
Operation and care
Use the manual for the installed Remote Manual controller. Check the equipment before choosing parts or changing controls. Connect networking and automated run modes are a different control package.
- Check for leaks and hose chafe, and clean the seawater strainer.
- Replace prefilters as needed. Maintain the carbon filter that protects the membrane during freshwater flushing.
- Follow the manual when chemical cleaning is needed. Low voltage, restricted feed water, and poor storage also need to be addressed.
Historical specifications
| System | Newport 1000R Remote Manual — NP-1000R |
|---|---|
| Rated production | 41 US GPH (155 L/h); 1,000 US gallons (3,785 L) per day |
| Voltage configuration | 24V DC or 120V/240V AC configurations |
| Existing catalog electrical reference | 110V AC 10A or 220V AC 5A in the existing specification table; identify the 24V DC version from its nameplate |
| Membranes | 2 × 40-inch |
| Feed-pump arrangement | magnetic-drive vane feed pump |
| Prefilters | 20 micron and 5 micron |
| Controls | Remote Manual controls |
| System weight | 182 lb |
| Feed-water temperature reference | 36°F to 110°F |
| Rating conditions | Use the original system manual and commissioning data |
Daily capacity is a rounded rating for continuous operation. Plan around your actual running hours and allow for flushing. Use the installation manual to size wiring and circuit protection.
Manuals and downloads
Provide the installed model, controller type, voltage, and serial number to obtain the correct Remote Manual documentation.
Send photos of the control panel, equipment labels, membrane assembly, and electrical nameplate.
Get help from Seatech
Spectra Watermakers is the manufacturer. Seatech Marine Products is an authorized dealer. Send equipment photos and identification labels for help finding documents, service parts, or a current system.
Availability and service
No Longer Available. For service or warranty questions on an installed system, provide its serial number, original purchase/commissioning details, and the part or symptom you need help identifying.
International customers: Seatech ships worldwide. Contact us for a shipping quote if the website estimate needs review.