Skip to main content
Same-Day Shipping Order by 5 PM Eastern Time Items marked “Ships Same Day” qualify
100% USA-Based Business Serving boaters nationwide and internationally since 2001
Authorized Dealer Full manufacturer warranty

Spectra Newport 1000 Watermaker Automated Connect Series 110/220v AC System

(No reviews yet) Write a Review
SKU:
NP-1000C-AC
UPC:
NP1000CAC
Condition:
New
Use the Special Pricing Form Below or Call: 619.222.9613
Built to Order - Typical Lead Time is 30 days

Description

Spectra Watermakers manufacturer logo

Sales & System Planning — Seatech Marine Products

Newport 1000C Connect — AC Marine Watermaker

NP-1000C-AC · Spectra Connect automation · 110V or 220V AC

Make fresh water aboard with the Spectra Newport 1000C Connect — AC (NP-1000C-AC). This complete marine reverse-osmosis watermaker is rated for 41 US gallons (155 liters) per hour. It includes touchscreen controls and automatic freshwater flushing.

Why choose this model?

  • Fill your tanks aboard. Make fresh water from seawater and reduce how often you need dock water.
  • Plan your running time. At the rated output, three hours makes about 123 US gallons before startup and freshwater-flush allowances.
  • Set a production target. Run by time or water volume. Fill Tank mode uses the installed tank-full switch to stop production.

Actual output depends on seawater conditions and installation. Check module dimensions and leave room for servicing.

What's included

  • Feed-pump module with magnetic-drive vane pump, dual 20-micron/5-micron prefilters, and two accumulators.
  • Clark Pump and membrane module with 3 × 40-inch reverse-osmosis membranes.
  • Boost-pump/sea-strainer module and automatic freshwater-flush module with charcoal filter.
  • Spectra Connect remote touchscreen display with 100-foot cable and tank-full switch.
  • Installation kit, service kit, supplied product tubing, inlet-hose assembly, and manual.
  • Two 25-foot lengths of 3/8-inch flush tubing, 25 feet of 5/8-inch braided hose, 25 feet of 3/4-inch suction hose, and 10 feet of 3/4-inch vinyl hose.
  • 15-foot feed-pump-to-strainer hose and 10-foot feed-water inlet hose with the supplied end fittings.

Confirm the final packing list with your quote. Boat-side installation parts are separate.

What you'll need for installation

  • Seawater intake through-hull with a suitable scoop/strainer and seacock, plus a brine-discharge fitting.
  • Power cable and circuit protection sized for the chosen voltage and cable run.
  • Connections to a properly vented freshwater tank and a pressurized freshwater source for flushing.
  • Accessible mounting space and any extra hose, tubing, fittings, or mounting hardware your boat needs.

Options and spares

Buying questions

What power supply does it need?

Order the 110V or 220V AC factory version that matches your AC supply. Confirm frequency with the quote. Shore power, a generator, or an inverter must be sized for the system. An inverter also needs a suitable battery bank and charging system.

For direct DC power, compare the 24V DC 1000C system.

Can I use a phone or chartplotter?

A phone, tablet, or computer can access Spectra Connect on the same properly configured onboard network.

Compatible Garmin, Raymarine, and Navico/Simrad chartplotters need the specified Ethernet connection, supported display software, Connect firmware v3.1 or later, and any required adapter. Check the integration guide before ordering.

The onboard connection alone does not provide access from shore.

Compare models

Operation and care

Automatic flushing needs DC control power, pressurized freshwater, and enough water in the tank. Keep these available for automatic storage flushing. Follow the manual for longer storage.

  • Check for leaks and hose chafe, and clean the seawater strainer.
  • Replace prefilters as needed. Maintain the carbon filter that protects the membrane during freshwater flushing.
  • Follow the manual when chemical cleaning is needed. Low voltage, restricted feed water, and poor storage also need to be addressed.

Specifications

SystemNewport 1000C Connect — AC — NP-1000C-AC
Rated production41 US GPH (155 L/h); 1,000 US gallons (3,785 L) per day
Voltage configuration110V or 220V AC
Published current requirement110V AC 10A or 220V AC 5A
Membranes3 × 40-inch
Feed-pump arrangementmagnetic-drive vane feed pump
Prefilters20 micron and 5 micron
ControlsSpectra Connect automation
System weight177 lb (80.3 kg)
Feed-water temperature reference36°F to 110°F
Rating conditions33,000 ppm seawater at 77°F (25°C)

Daily capacity is a rounded rating for continuous operation. Plan around your actual running hours and allow for flushing. Use the installation manual to size wiring and circuit protection.

Manuals and downloads

Newport 1000C Installation & Operating Manual

5/8/2025 version. Match the control package, voltage, and membrane layout.

Newport 1000C Fact Sheet & Dimensions

July 16, 2025. Specifications and dimensions.

Newport 1000C Plumbing Diagram

Check module placement and hose routing.

220V AC Wiring Diagram

For the 220V build only. Use the applicable manual and supplied drawing for other AC configurations.

Spectra Connect & MFD Integration

Compatible displays require the correct network connection, supported firmware, and any model-specific adapter.

Get help from Seatech

Spectra Watermakers is the manufacturer. Seatech Marine Products is an authorized dealer. Send your daily water use, preferred running hours, boat voltage, and mounting photos or measurements. We can help choose the system and installation parts.

Ordering and warranty

  • Standard manufacturer warranty: One year, subject to the manufacturer’s full terms.
  • Extended-coverage program: Spectra describes two-year system coverage and lifetime Clark Pump coverage through its authorized full-service-provider program. Authorized installation and commissioning, owner registration, commissioning-report submission, and factory approval are required. See the applicable manual for eligibility and exclusions.
  • No sales tax on purchases outside of California
  • Built to Order - Average 30 day lead time

Confirm current availability and lead time before ordering. Because Spectra has MAP pricing on its systems, use the quote form for direct pricing.

International customers: Seatech ships worldwide. Contact us for a shipping quote if the website estimate needs review.

Warranty Information

Seatech Marine Products, Inc. is an authorized dealer for Spectra Watermakers. View their website for more information: https://www.spectrawatermakers.com/us/us/support/contact

Videos Hide Videos Show Videos